If you often deal with DIY projects, you may need to learn how to get spray foam out of clothes. Spray foam or expanding foam refers to the substance sprayed to the surfaces by using an aerosol gun or can.
This material with a polyurethane basis is generally used as a foundation filler or insulator and in various art and DIY projects.
Removing it from any surface would be difficult, let alone removing it from your clothes or fabric. So, what can you do?
Will Spray Foam Come Out of Clothes?
There is always a possibility that you can remove dried spray foam on clothes, but make sure that you do it correctly. It also depends on how long the dried substance has been there. If it’s relatively new, then removing it should be a breeze. On the contrary, if it has been there for quite a while, there are chances that it may NOT come off.
There are some methods to try, but make sure you follow everything to the letter, including the protective gear. People who have done this have experience with the substance, so they know what they are doing.
Can You Remove Spray Foam from Clothes?
Knowing how to get spray foam out of clothes is probably easier than you have thought. But you must wear the appropriate safety gear since you are dealing with chemical-based stuff.
DON’T use your bare hands to remove it. There are basically different methods and ways that you can use, but in general, you will need these stuff:
- Mineral spirits
- Acetone or nail polish remover
- Nail file
- Polyurethane stripper
- Putty knife
- Respirator (or protective mask)
- Chemical resistant gloves
Read also: How Long Does Spray Foam Take to Dry?
Different Options
One of the best ways to remove the foam is to do it while wet no matter the fabric. When the foam expands and dries out, it will embed itself within the clothing, wrapping around the fibers. As a result, it would be difficult (even impossible) to completely remove it without causing damage to your clothes.
So, remove the foam immediately when it comes to your clothes. By using an old rag, wipe it off as soon as possible. Some people may use paper towels, but you should know that they aren’t as effective as the rag.
After you remove the foam, apply acetone to the same affected area. Simply dip the rag (find a clean part) and dab it firmly into the affected parts.
Acetone removes the foam before it starts to set or solidify.
Afterward, apply stain remover, and then wash your clothes. It’s advisable to put the stain remover onto the back area (of the stain) and then wash. Remember that different stain removers may have different operations or ways of working. Make sure you read the instructions first before applying.
- Polyurethane Stripper
This method works for fried foam. Apply the stripper to the back side of the stain and then use a nail file or putty knife to remove it. Do it carefully and gently to remove as much foam as possible, or you can damage your clothes.
- Furniture Refinisher
In this method, you first use a putty knife or nail file to remove the foam. When there is only a stain left, dab the furniture refinisher over the stain by using a clean rag. Wait for a while and then wash it.
Conclusive Ends
The best way to prevent it is to use old clothes you can discard afterward. If you take this path, you won’t have to worry about learning how to get spray foam out of clothes and bother yourself.
